maszyny do obróbki metalu / inne maszyny do obróbki metalu
Producent: DMG MORI
Model:DMF 300|11
Numer pozycji: 166192322
Ilość: 1
Data: 09.01.2025
Lokalizacja:
Niemcy
Cena:
Seller-item-No.:030319
| Working area 1 | |
| Longitudinal | 3000 mm |
| Cross | 1100 mm |
| Vertical | 1050 mm |
| Feed drives: | |
| Feed rate X / Y / Z | 42000/42000/42000 mm/min |
| Rapid feed X / Y / Z | 42/42/42 m/min |
| General | |
| Travelling column machine; Control: CELOS with Siemens 840D sl Operate | |
| NC-swivel head (B-axis) | Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ft |
| Cabine | Full protection cabin |
| Spindle speed 15,000 rpm, 200Nm | Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) |
| Rigid table with integrated rotary axis (leftside) | Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg // 2,644 lbs hydraulic clamped in position |
| Removable partition wall DMF |11 | Partition wall removable for pendulum machining, 2 working spaces |
| Tool magazine 90 places | Tool magazine 90 places SK40/HSK-A63 Chain type with double gripper |
| Inner coolant supply 40Bar/980l | Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle |
| Chip flushing for working area | Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included (only available starting internal coolant supply 980l) |
| Head flushing | Head flushing for machines with SK40/SK40 BIG-PLUS®, BT40 / BBT40 or CAT40 at machines with HSK-A63 it is standard Note: Option is deactivated in case of function M8 |
| Oil mist separator (with partition wall) | Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h |
| Minimum lubrication external | Minimum lubrication external for vertical or swivel head |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air, low oil rate possible |
| Infrared measuring probe PP 600 optical | Infrared touch Probe type Renishaw PP600 optical (OMP600) |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Tool laser measuring Blum | Laser tool measuring Blum LC50 DIGILOG Measurement of length and diameter Automatic cleaning with external air blast Calibration Tool with tool holder (not with TT 140/160 possible, for pendulum machining, please order 2 pieces) |
| Tool breakage control mechanical | Tool breakage control mechanical version checkable tool length 55 to 400 mm |
| MPC Machine Protection Control | MPC Machine Protection Control Machine protection by quick shutdown |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Automation Interface partition wall, for left working area | Automation interface for partition wall mode for one-side loading left according to DECKEL MAHO Standard consisting of: Interface (Profibus) via M65 Automatic loading via working area door 4-chanel energy supply to machine table (No change possible to D5152871 oth |
| Door drive for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| Laminated safety glasses | Laminated safety glass for Windows in the two front doors |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Stop block Speedmaster | Stop block HSK-A63/SK40/CAT40 for Speedmaster spindle |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| Interpolation turning 2.0 | Interpolation turning 2.0 for the machining of internal and external diameter using spindle orientation with the possibility of free contour programming |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Transportation traverse DMF 300|11 | Lifting frame for use with crane |
| Special equipment | Preparation for clamping hydraulics as preparation (no def. control): 4 lines on the integrated rotary table on the left, 4 lines on the rigid table on the right (unused) |
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 300|8 | ||
| 2016 | DMG MORI | DMF 260/11 | |
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 400|11 | ||
| 2016 | DMG MORI | DMF 260/11 KGT | |
| 2016 | DMG MORI | DMF 260/11 KGT | |
| 2017 | DMG MORI | WASINO G 100 | 300 |
